Pocket NC 101 (V2-10) - Kinetic Control Online Course
Details
Learn the basics of using the Pocket NC V2-10 at courses.pocketnc.com.* From moving the machine's axes to programming your first part in Fusion 360 this course will walk through the steps to make a basic part on the Pocket NC mill. This course is ideal for the customer new to CAM and CNC machining.
The course has been updated in February 2022 to include the new Kinetic Control software. Students will cut 3 parts total if they work from start to finish.
Customers will need the following products to complete the course, the first 2 are not included standard with the machine:
ER40 Fixture with 1 inch collet (not included with machine)
2 pieces of B-table stock delrin (not included with machine)
Vise
Extended tool holder with 1/8" ER11 collet
Datron single flute end mill, 0068630E
Wax cube
*This course is geared towards educators and students at the most basic CAM and CNC leve. You can use this online course for self-directed learning as an industry or personal customer as well. We also have free learning resources available here.
Details
Learn the basics of using the Pocket NC V2-10 at courses.pocketnc.com.* From moving the machine's axes to programming your first part in Fusion 360 this course will walk through the steps to make a basic part on the Pocket NC mill. This course is ideal for the customer new to CAM and CNC machining.
The course has been updated in February 2022 to include the new Kinetic Control software. Students will cut 3 parts total if they work from start to finish.
Customers will need the following products to complete the course, the first 2 are not included standard with the machine:
ER40 Fixture with 1 inch collet (not included with machine)
2 pieces of B-table stock delrin (not included with machine)
Vise
Extended tool holder with 1/8" ER11 collet
Datron single flute end mill, 0068630E
Wax cube
*This course is geared towards educators and students at the most basic CAM and CNC leve. You can use this online course for self-directed learning as an industry or personal customer as well. We also have free learning resources available here.
Details
Learn the basics of using the Pocket NC V2-10 at courses.pocketnc.com.* From moving the machine's axes to programming your first part in Fusion 360 this course will walk through the steps to make a basic part on the Pocket NC mill. This course is ideal for the customer new to CAM and CNC machining.
The course has been updated in February 2022 to include the new Kinetic Control software. Students will cut 3 parts total if they work from start to finish.
Customers will need the following products to complete the course, the first 2 are not included standard with the machine:
ER40 Fixture with 1 inch collet (not included with machine)
2 pieces of B-table stock delrin (not included with machine)
Vise
Extended tool holder with 1/8" ER11 collet
Datron single flute end mill, 0068630E
Wax cube
*This course is geared towards educators and students at the most basic CAM and CNC leve. You can use this online course for self-directed learning as an industry or personal customer as well. We also have free learning resources available here.
